Even in the most basic operations such as guillotining, we have written out procedures to avoid any problems of tearing, marking, crushing, soiling, scratching or splashing of inks or composites.
The mechanical characteristics of the PET (lenticular) and the different associated composites do not allow the use of classical die-cutting tools. The pressures exerted are substantial and lead to considerable deformation of the substrate. In-depth studies have allowed us to find appropriate materials and adjustments.
To date lenticular printing has been used on polyethylene tereophthalate (PET), a rigid transparent copolymer. The PET is glued using a reactive hot-melt glue especially designed for this purpose. The particularity of this type of glue is that its definitive cross-linking is due to the moisture in the atmosphere. It should be noted that gluing reaches its definitive values around 5 to 7 days later. The glued cases may however be handled 24 hours after assembly.
It is imperative to make "print" reserves so as not to glue over the ink. A double gluing device (patented) could be a worthwhile solution.
Séquence 3d Limited Liability Company (SARL) capitalised at 37,000 euros
N°SIRET: 442 576 864 00031 Code APE: 221J
Address: La planche - 42600 Saint Paul d'Uzore - FRANCE